Roger Kehdi Mitsubishi Service in Tigard, OR

Check Engine Light & Engine Diagnostics in Tigard, OR

Near Portland. Find the cause before you pay for a repair.

A check engine light rarely comes with an explanation. It might be a loose gas cap, or it might be the first sign of a misfire. Roger Kehdi Mitsubishi provides check engine light and engine diagnostics in Tigard near Portland, for Mitsubishi vehicles and all other makes, so you know what is going on before deciding on a repair.

Diagnosis comes first. That way, any repair you approve is aimed at the actual problem rather than a guess.

Want to check offers first? See current service and parts specials.

Steady or flashing

What Your Check Engine Light Is Telling You

Your vehicle's computer watches the engine, emissions and fuel systems constantly. When a reading falls outside its normal range, it stores a diagnostic trouble code and turns on the light.

A steady light usually means the vehicle has detected a fault that should be checked soon. It is generally fine to drive to a service appointment, though you should watch for changes in how the vehicle runs.

A flashing light usually signals an active misfire that can overheat and damage the catalytic converter. Reduce speed, avoid hard acceleration, and get the vehicle looked at as soon as possible. If it runs very poorly, call us at 503-777-2886 before driving further.

Beyond the light

Drivability Problems Worth Diagnosing

Plenty of engine concerns show up before, or without, a warning light. Bring the vehicle in if you notice:

  • Rough idle, shaking or stumbling at stops
  • Hesitation, surging or loss of power when accelerating
  • Hard starting or stalling
  • A noticeable drop in fuel economy
  • A smell of fuel, a sulfur smell, or unusual exhaust smoke
  • Other warning lights that come on together with the check engine light
How it works

How Engine Diagnostics Work

A trouble code points to a system, not always to a single bad part. A code for a lean condition, for example, could come from a vacuum leak, a sensor or a fuel delivery issue. Here is how a diagnostic visit goes:

  1. Share the detailsTell the advisor when the light came on, whether it is steady or flashing, and anything you have noticed in how the vehicle drives.
  2. Read codes and testA technician retrieves stored codes and data, then tests the related components to confirm the cause.
  3. Explain the findingsYou get an explanation of what was found and the recommended repair, so you can decide how to proceed.

A parts store code reading can be a useful starting point. It is not the same as a diagnosis, because a code alone does not confirm which part failed.

Mitsubishi owners

Mitsubishi Check Engine Light Service Near Portland

Roger Kehdi Mitsubishi technicians are Mitsubishi-trained and have access to specialized Mitsubishi technology for diagnosing the Outlander, Eclipse Cross, Mirage and Outlander Sport. That model-level familiarity helps when a code has more than one possible cause.

The Outlander PHEV adds electric drive systems alongside its gasoline engine, and it can display its own system warnings in addition to the check engine light. Let the advisor know exactly which messages you saw.

We also diagnose vehicles from other manufacturers. Our service department services all makes and models, so you can bring in whatever you drive.

Service and parts offers

Check Current Service Specials

Before you book a diagnostic, look over the service and parts specials page to see whether a current offer fits your visit.

View Service & Parts Specials
Tigard service center near Portland

Engine Diagnostics Near Portland, Beaverton and Lake Oswego

Our service department is at 11880 SW Pacific Highway in Tigard, near Portland, Beaverton, Lake Oswego, Tualatin, King City and Sherwood.

If your light is steady and the vehicle drives normally, schedule a time online that fits your week. If it is flashing or the vehicle runs poorly, call first so we can help you decide on the safest next step.

Roger Kehdi Mitsubishi Service

11880 SW Pacific Highway
Tigard, OR 97223

Service: 503-777-2886

Service hours
Monday to Friday8:00 AM to 5:00 PM
SaturdayClosed
SundayClosed

Get hours and directions

Questions drivers ask

Check Engine Light FAQs

Can I keep driving with my check engine light on?

If the light is steady and the vehicle drives normally, it is usually fine to drive to a service appointment soon. If the light is flashing or the vehicle runs poorly, reduce driving and call 503-777-2886 for advice.

Why is my check engine light flashing?

A flashing check engine light usually indicates an active engine misfire. Continued hard driving can overheat the catalytic converter, so have the vehicle checked as soon as possible.

Can a loose gas cap turn on the check engine light?

Yes. A loose or worn gas cap can trigger an evaporative emissions code. If tightening the cap does not clear the light after some driving, have the vehicle diagnosed.

Is reading the code the same as a diagnosis?

No. A trouble code points to a system or condition. Diagnosis means testing to confirm which component or condition is causing it.

Do you diagnose vehicles that are not Mitsubishi?

Yes. Roger Kehdi Mitsubishi services all makes and models, including engine diagnostics.

Do I need an appointment for a check engine light?

Walk-ins are welcome during service hours. You can also schedule service online or call 503-777-2886.

Get Your Check Engine Light Diagnosed in Tigard

Book online, call the service department, or stop by during service hours. Mitsubishi and non-Mitsubishi vehicles are welcome.